[. . . ] If damage is caused by failure to follow the instructions, the warranty does not apply. 9) You can connect your phone to the dock directly or though the supplied USB cable. note Anschluss oder Buchse 1 2 3 4 5 6 ANTENNA (Schwarzer Anschluss) External Mic (Schwarzer Anschluss) SUBWOOFER (Blaue Buchse) REAR LINE OUT L (Weiße Buchse) REAR LINE OUT R (Rote Buchse) OE REMOTE (Brauner Streifen) FRONT LINE OUT L (Weißer Anschluss) FRONT LINE OUT R (Roter Anschluss) Verbinden mit Antenne für Radio Externes Mikrofon für Anrufe Subwoofer Linker Rücklautsprecher Rechter Rücklautsprecher OE Fernbedienung Linker Frontlautsprecher Rechter Frontlautsprecher • • • • 1 What’s in the box (Fig. 1) 1 3 5 7 Main unit and front panel (with a sleeve) Rubber cushion Disassembly tool X 2 User manual 2 4 6 8 Trim plate Screw X 1 USB cable Quick start guide repeatedly to select a source. [. . . ] € If the USB socket of your phone is not on its bottom, flip the USB connector inwards to hide it. Switch the cushions to make sure that no buttons on any side of the phone are to be covered. To match the USB socket of your phone, turn the USB connector by 180° as illustrated if necessary. Note To use the hands-free function or play audio through the dock, connect your phone with the car audio system via Bluetooth first. To enjoy the latest features, update the application on your phone when an update message prompts. After update, the interface and features may be different from the description in this section. 1 2 1 2 4 Red wire Run the CarStudio application on your phone. Charge your phone Once your phone is connected and recognized, the charging starts. € • 5 6 7 8 Green and green/ Left speaker (rear) black wires White and white/ Left speaker (front) black wires Gray and gray/ black wires Purple and purple/black wires Right speaker (front) Right speaker (rear) Philips does not guarantee compatibility with all USB storage devices. 1 2 If play does not start automatically, 1 Press / to select a folder. 2 Connect the ISO male connector and other wires to the car audio system. 2-2) Connector or socket Connects to Antenna for radio An external microphone for phone call Subwoofer Rear right speaker OE remote Front left speaker Front right speaker 7 Listen to an external device (Fig. 7) With this car audio system, you can listen to audio from a player or make a call through Bluetooth. 2) Hinweis • • • • • • Tip • The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Philips does not guarantee the compatibility with all Bluetooth devices. Before pairing a device with this system, read its user manual for Bluetooth compatibility. Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. The operational range between this system and a Bluetooth device is approximately 3 meters (10 feet). Any obstacle between this system and a Bluetooth device can reduce the operational range. Keep away from any other electronic device that may cause interference. [. . . ] Sie 3 4 5 6 Place the supplied rubber cushion over the end of the mounting bolt. 3 - 3) Slide the system into the dashboard until you hear a “click”. Hinweis 6 7 • Make sure that the internet connection is active on your phone. Until » Run the Google Play Store application on your phone. [. . . ]